Make sure the reject vault is installed correctly. If the cables are undamaged, the main board or electronic journal may be defective 155 Electronic journal modify record failure 1. Clean the card reader assembly with a cleaning card. This book will help you make the most of your Linux system. weblink
Results: No money is dispensed, screen and receipt display system unavailable. If it is necessary to check continuity of the cable assembly, refer to the appropriate ATM Service Manual for pin out of the cable assembly 5. Open the printer support bracket and verify that there are no jams in the printer or the paper path. Recommended Action: This error occurs when the logical sequence of the commands sent to the dispenser is not the one expected by the system.
Replace the dispensing mechanism. Use the reject channel error code function to verify the operation of the sensors on the note transport module. This will occur if the machine is switched off and on during normal daily operation. It can occur if there are notes already in the transport before the start of a transaction or if the exit sensor is blocked. 1.
interrupt acknowledge registers) - uninitialized pointer listed in the Watch window - scrolling through the disassembly window into an undefined memory region For troubleshooting purposes close all debug windows and see If the voltages are not within tolerance, the cable or power supply may be defective. 4. Telephone hardware problems. If the sensor is not operating normally, replace the note transport module.
If the error clears, put the cash dispenser in service. 5. Make sure the connectors are seated securely on the main board and on the electronic journal. 4. Inspect main board to electronic journal communication cable for damage. Results: No money is dispensed, screen and receipt display system unavailable.
Replace the modem module. I updated the question with the relevant answers to your questions, the model name and what I'm trying to do. –Dac Saunders Jun 2 '13 at 0:53 1 Can you Inspect the note transport and delivery throat make sure all belts are on track and there are no documents jammed in the transport or exit areas. Inspect the feed path for jammed notes.
Replenish paper as needed. try this If the cables are undamaged, the main board or electronic journal may be defective 149 Read from electronic journal failed 1. Inspect main board to electronic journal communication cable for damage. Clear the error.
Remove all documents from the reject vault. http://fileupster.com/hardware-error/hardware-error-52102.html Otherwise, it may be necessary to replace the dispenser.4. Inspect for a currency jam at the diverter. 2. When the note is stuck in the note transport sensor. 2.
Such issues are most commonly caused by: - opening Memory window in undefined memory space - viewing SFR groups for the peripherals, which are not yet enabled - reading SFRs which Remove any jammed currency. 2. If the inject cassette ID function works on a different cassette. http://fileupster.com/hardware-error/hardware-error-1032-iso.html When the note is stuck in between the note transport sensor and the throat.
Suspect the main board, the TCP-IP connection device (Quad Port Board in 96XX, Docking board on RL, FT or RT) or the TCP-IP equipment. 237 TCP/IP device failed Out going commutations The book focuses on the following topics:Memory management, including file buffering, process swapping, and Direct memory Access (DMA) The Virtual Filesystem layer and the Second and Third Extended FilesystemsProcess creation and Error Code: 165 Description: Electronic journal not present.
If the currency is in “fit” condition and the error persists, consider replacing the cassette or the dispenser. 34 Mis tracked note at double detect. 35 Mistracked note at exit. Clear all errors and test the dispenser by completing several test dispenses. Open the Printer Bracket and verify that there are no jams in the printer or the paper path. Verify that all access panels are closed and secured.
If the cash dispenser operates normally put it back in service. Inspect electronic journal to dispenser communication cable for damage. This is a Triton Connect error. 1. http://fileupster.com/hardware-error/hardware-error-9728.html Error Code: 205 Description: SPED keypad reported tamper condition.