Home > Hardware Error > Hardware Error 0x03 0x01

Hardware Error 0x03 0x01

I had this problem with this pack of Memorex DL dvds and finally decided to google the error message to arrive at this page. the first answer i received said to try different disc, saying that taiyo yuden was the best. I used a DVD with a brush built into the actual DVD. Apple may provide or recommend responses as a possible solution based on the information provided; every potential issue may involve several factors not detailed in the conversations captured in an electronic http://fileupster.com/hardware-error/hardware-error-0x03.html

Indicates a COPY, COMPARE, or COPY AND VERIFY | | | command was aborted due to an error condition on the source | | | device, the destination device, or both. Save as a disc image first. Reply 15. Every disk brand and type uses different power ranges for the laser and it is down to all sorts of reasons (even the dye used on the disk affects it). check over here

Try to | | make it reproducible and inform the SCSI | | channel (for details on bug reporting | | see Drew Eckhardts SCSI-HOWTO). do you really believe that verbatim will work better than taiyo yuden or is it just the drive that apple supplies? Call the drives manufacturer and request latest level. 210 X'D2' The device was reset due to device power-up, SCSI bus reset, or manual tape load/eject. I'm going to try using a disc cleaner, your post was really helpful, thanks.

Reply 30. SCSI Additional Sense Data lists on t10.org. When multiple recovered errors occur during one command, the choice of which error to report (e.g., first, last, most severe) is vendor specific. 0x02 NOT READY Indicates that the logical unit Welcome to Mac-Forums!

Indicates that the target aborted the command. | | | The initiator may be able to recover by trying the command again. | |--------+--------------------------------------------------------------------| | Ch | EQUAL. The read or write operation is not performed. | +=============================================================================+ Table 70: Sense Key (8h-Fh) Descriptions +========-====================================================================+ | Sense | Description | | Key | | |--------+--------------------------------------------------------------------| | 8h | BLANK a problem with he disk). More Help you guys are great to take the time to respond to us.scottThe Taiyo Yuden discs should work fine and I don't think trying more brands will make any difference.

Apple disclaims any and all liability for the acts, omissions and conduct of any third parties in connection with or related to your use of the site. Since a couple of weeks back i get these error messages when i try to burn dvds. Internet, Networking, and Wireless iPhone, iPad, iPod iPhone Hardware and Accessories iPod Hardware and Accessories iPad Hardware and Accessories iOS and Apps Mac OS X Software OS X - Operating System Not on every session but often, and in a different parts of the process."The drive reported an error:Sense Key = HARDWARE ERRORSense Code = 0x03"I've been checking and repairing my system.

Privacy policy About Wikistix Disclaimers Jump to navigation Developer Zone 简体中文 English Español Português Русский Sign in Signup Support Search form Search IoT Hardware All Development Areas Home Developer JourneyIoT Basics Reply With Quote 02-11-2007,12:18 AM #2 NanoBite View Profile View Forum Posts Member Since Oct 27, 2005 Posts 4,702 G'day DjViral & welcome to Mac-Forums. Results 1 to 2 of 2 Thread: Burning DVD's getting Sense Code = 0x03, 0x01 error Tweet Thread Tools Show Printable Version Subscribe to this Thread… 02-11-2007,12:11 AM #1 DjViral View Level 7 (27,026 points) May 6, 2007 11:26 AM in response to Rich Gaspers_Jr.

Works wonders for me! have a peek at these guys I opened the drive and cleaned the lens with alcohol (well, vodka to be more exact because I didn't have anything more pure :)) And indeed, it now burns the same Single layer TDK DVD is OK. I do have a few suggestions though.

no such luck details of burner are as follows:MATSHITA DVD-R UJ-857D: Firmware Revision: KBV9 Interconnect: ATAPI Burn Support: Yes (Apple Shipped/Supported) Cache: 2048 KB Reads DVD: Yes CD-Write: -R, -RW DVD-Write: Try to | | make it reproducible and inform the SCSI | | channel (for details on bug reporting | | see Drew Eckhardts SCSI-HOWTO). There are lots of threads on this topic and people seem to suggest numerous solutions. check over here Helpful (0) Reply options Link to this post by MGW, MGW May 6, 2007 11:26 AM in response to Rich Gaspers_Jr.

This is exactly how my whole mess started. Thank you! Table 2.

Reply 6.

Reply 28. UWAYEZU Olivier - May 4, 2009 Hi everyone I read yours but I think we have the same problem even I have a mac book. hope it's introduce branch😉 Reply 5. Level 6 (16,037 points) Mar 23, 2007 4:07 PM in response to Rich Gaspers_Jr.

Enjoy Everyone, crazygoat Reply 24. Back to top #8 laurynsausage laurynsausage Newbie Members 5 posts Posted 23 January 2007 - 11:30 AM Sorry..... This status shall be implemented if tagged queuing is implemented. http://fileupster.com/hardware-error/hardware-error-sense-code-0x09-0x01.html I just don't trust those Matshita drives.

Now I have ended up without a warranty and in need of a new DVD drive.Cp. Reply 26. thanks again scottThe same thing with my new iMac 2.33 Intel when I tried to burn DVD DL. Finally, and perhaps the most straightforward suggestion, try a different PSU/Battery.

apple people suggested dvd-r, but so far, not much luck. Ensure the volumes have not been rearranged. Either way, any advice would be valued and appreciated.Rich Helpful (0) Reply options Link to this post by Rod Hagen, Rod Hagen Mar 23, 2007 10:42 PM in response to Rich The solution is a good optical cleaning!!

Back to top #2 freshburn freshburn Digital Guru Members 1,813 posts Posted 21 January 2007 - 11:16 AM I suggest trying a different brand of media. Hi there. Ensure the SCSI ids are correctly assigned to the correct device, and the device is not being accessed by another process. I tried with Verbatim and Samsung and reached result only two times.

The meaning of hd_status can be found in drivers/scsi/scsi.h: This unsigned int is composed out of different parts:

 lsb | ... | ... | msb =======|===========|===========|============ status | sense key Caution: Currently | | there is no overlength checking. | EAGAIN | the device would block. Dry method, no liquid required. I went out and got the dry brush disc thingy, and, contrary to my expectations (I didn't think anything would change), I popped the same disc that had previously failed to 

In these entries, byte 3E is the sense key, byte 3D is the ASC, and byte 3C is the ASCQ. (This is also true of entries logged by any of the For Windows , these codes also appear in the Event Log. Try again later. | ENOMEM | memory required for this request could not be | | allocated. Helpful (0) Reply options Link to this post by runclimbscream, runclimbscream Aug 15, 2007 2:02 PM in response to Rich Gaspers_Jr.

Indicates that a buffered peripheral device has | | | reached the end-of-partition and data may remain in the buffer | | | that has not been written to the medium. If i'm changing the drive, hat brand and model should i use?Please helpBest regards Dalpha Helpful (0) Reply options Link to this post by Peter R., Peter R. I need HELP! RESERVATION CONFLICT.