This occurs when attempting all operations, Maintenance, cleansing, copying etc... I am holding it in my hand. worked like a charm. I went to the Dell site and got no help. http://fileupster.com/hardware-error/hardware-error-0502-lexmark.html
I recently found a A960 in a garbage dumpster close to where i live…i don't usually pickup garbage but it was neatly packed in an HP box and was in really I somebody has a more permanent solution, please post is here. Question about Lexmark X Printers & Copiers 1 Answer Getting hardware error 0502 hardware error 0502 Hardware Error: 0502. Thanks.
Reply Calambres says: 2007-10-22 at 2:21 pm Thanks… wiping the rod solved the 0502 error in my Lexmark X5130 all-in-one printer. At my workplace, I am a VUTEK digital printing operator, and every two days, I have to clean the encoding strip to make sure of getting good signal from the printhead. So it's still getting the boot for an all in one photoprinter whose cartridges are cheaper. Great thip, many thanks Reply ilter says: 2009-01-08 at 8:26 pm Hey, thanks for the tip.
IT IS ONLY A PRINTER. I recommend lubing the rail. Thanks heaps! milly Reply Valor~ says: 2010-02-01 at 5:17 pm This really works!
Finally googled and found your post. Reply Trish says: 2008-12-09 at 8:42 pm Yay!! only wanted to scan how annoying i was getting. http://support.lexmark.com/index?productCode=LEXMARK_X5150&segment=SUPPORT&page=content&id=HO2707 Thanks for the post, and another thanks goes to Alan, way back to 2007! :)) Cheers.
How simple. Leave the power cable disconnected for 30 seconds. • Slide the cartridge carrier to the middle of the printer by taking the top part of the belt and moving it gently Within 2 mins of searching and with one Click I found this site and cured my Blues. I put it back together.
Dan Reply Mary says: 2008-03-15 at 2:03 am Found this website to be extremely helpful but still has not solved my hardware 0502 error, for my Dell 960A all in one http://lexmarkprinters.livejournal.com/10816.html Reply Ian says: 2009-10-14 at 2:27 am Thanks a lot for this, my P6350 is back up and running after 2 minutes of cleaning. says: 2007-12-14 at 4:03 pm I have just about scrapped my Lexmark 5150 because of the 0502 error. But now it seems to work fine again.
That worked perfectly! this content I cleaned and lubricated the metal rod, and so far the printer is working again. C'è stato un errore con l'applicazione. take cartridges out.5.
And, Clem, whoever you are, your name will live on as legend. Is that why its banging frantically against the left side? Run the head side to side a couple of times, (power off), the travel is now virtually frictionless and the head will not wear. weblink I changed ink, wiped bars.
But it so hard to put it somewhere, where you can't even see. I even saw a pic of how to do it. Reply Jenn says: 2009-09-06 at 12:12 am Thank you so much for the advice.
If that fails, go to support.lexmark.com and search the knowledgebase. Reply Ed Lozano says: 2006-05-10 at 4:05 am I have had the "0502"error problem for the last few days. Reply Chris says: 2008-01-29 at 12:49 pm Great solution! It happens everytime I print or copy a document in color and doesn't seem to happen with the b and w images.
You are basically moving it down, slightly forward, and then let it go back up again. Reconnect the power cable and switch the printer on again. 11. Reply Kim says: 2007-07-01 at 7:50 am Great my 76 year old dad (bless him) was having trouble and he wanted me to come round and fix it. check over here Reply joe says: 2008-01-04 at 11:13 pm thank you so much !!!!
Reply Olivier says: 2008-10-29 at 6:17 pm This worked like a charm! After cleaning everything and wiggling the plastic strips my printer is working again. Hope this helps. Leave the power cable disconnected for 30 seconds. 4.
keeps showing error 0502 check out this http://www.fixya.com/support/t114419-error_0502 Question about Lexmark X Printers & Copiers 1 Answer Lexmark 6170 code 0502. ...The error could be caused by an unseated encoder strip Get a Professional Answer Via email, text message, or notification as you wait on our site.Ask follow up questions if you need to. 100% Satisfaction Guarantee Rate the answer you receive. The next, it doesn't. While it was unplugged I again cleaned the encoder strip with a soft clean cloth.
THANKS SO MUCH!!! This is exactly the answer I was looking for since giving my old X6150 to my father for his office. move carriers to the LEFT.8. In order to attach the right side of the strip, the side with a D on it, I had to flip my printer on it's back so that I was able
I saw this site and the corresponding original message from ‘clem.' I cleaned the rod with a tissue several times, cleaned it with the paper towel, messed with the encoder strip, IT ALWAYS SOMETHING GOING WRONG WITH THEM.I HAVE KNOICA MINOLTA 2400 MAGIC PRO. Now when I turn the printer on, the carriage slams across to the left hand side (with an almighty bang!) and immediately gives a hardware 502 error. I started looking more in depth into the problem and noticed that a fishing hook was under something making the cartridges not go all the way across the rod!!
Reply Bernard J. replied6 years ago. I keep getting the message Error 1102.