Share a link to this question via email, Google+, Twitter, or Facebook. Here's the smartctl output: smartctl 5.41 2011-06-09 r3365 [i686-linux-3.2.0-52-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar T7K500 Device Model: This process can and should be turned off before the imaging process begins. How would a planet-sized computer power receive power?
SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x80) Offline data collection activity was But I used a disk editor (winhex) to repair those 2 bytes and everything came back up. DeepSpar Disk Imager Clearly, many factors need to be taken into consideration if an imaging tool is to approach the maximum possible imaging effectiveness using current technology. Can't find the meaning of the time, unc, abrt, idnf, amnf, tonf, and bbk. http://www.datarecovery.net/articles/hard-drive-sector-damage.aspx
Thanks ahead of time. The important point is that failed drives tend to have read instability no matter what the reason for failure. If not maybe it's better to get hard to service.Lets wait for OP report about MHDD scan. The operating system may have tried to read data on the hard drive from this sector and found that the error-correcting code (ECC) didn’t match the contents of the sector, which
I use this system for my work - is there a fix that can be made to correct the problem, without getting a new HDD? About the 3D Data Recovery Process A complete data recovery process includes these three phases: Drive Restoration: Damage to the hard disk drive (also referred to as HDD) is diagnosed and User contributions on this site are licensed under the Creative Commons Attribution Share Alike 4.0 International License. Uncrc Word with the largest number of different phonetic vowel sounds Chebyshev Rotation Large shelves with food in US hotels; shops or free amenity?
Before the data is written the data is randomized. Idnf Error But I'm curious, what is an unc error? Under normal circumstances the read timeout sends a software reset command to the drive as necessary. navigate to these guys The first pass could be configured to read only error-free sectors.
Self-test supported. Uncrate dropped hard drive accident w/ photo - Forum fix a dropped external drive - Forum Trying to fix my External Hard Drive ! (wd/usb) - Forum I dropped my 500GB Storage The time now is 11:58 AM. Both short and extended self-tests completed without error.
I have an S Forum Vista SP1 dropped DVD drive - fix? http://unix.stackexchange.com/questions/113737/does-my-hard-drive-have-bad-sectors-or-not The majority of modern hard disk drives are individually tested at the factory and have optimized adaptive parameters burned into the read-only memory. Mhdd Unc It is possible for ECC to improperly correct data under certain circumstances if the data occurs in a certain order. Deepspar Disk Imager Therefore ISTM that smartctl has performed a quick scan of the user area and hit UNC sectors on each occasion, in which case I suspect that you may get an UNC
Suspend Offline collection upon new command. Not the answer you're looking for? Until I have the chance for further investigation I have completely removed Firefox from the system. They usually make bootable cds available.
However when the second hard drive is connected Ubuntu won't boot. In other words, a sector read timeout can be used to identify problem sectors. However, even in this case multiple attempts at reading the header might result in a success, leading to the data being read.
If Selective self-test is pending on power-up, resume after 0 minute delay. Your Answer draft saved draft discarded Sign up or log in Sign up using Google Sign up using Facebook Sign up using Email and Password Post as a guest Name A useful addition to an imaging tool is the ability to detect head-clicks directly, so it can power down the drive immediately without waiting for a timeout, thus virtually eliminating the How much interest should I pay on a loan from a friend?
Are the words "expression" and "term" interchangeable in programming language theory? paper3.pdf Top rocket777 Post subject: Posted: April 23rd, 2007, 16:10 Joined: September 6th, 2006, 2:14Posts: 10 Thanks, interesting paper. I rebooted from the good drive, which worked fine. Since modern computers are equipped with ATA controllers that do not have ability to control the IDE reset line, this functionality must be implemented with a specialized hardware.
DeepSpar Disk Imager successfully incorporates all the functionality described thus far, and also incorporates additional features that further enhance its performance. This is the second time this has happened on that drive. You can change the parameters as necessary during the imaging process based on this information. The first occurs at LBA 0 and is the result of attempting to read 8 sectors beginning with sector 0.
It thought the device was no longer valid. When to use "bon appetit"? Note that using the processor to provide information on the fly this way does not slow down the imaging process, since data transfer is handled by a UDMA controller and not Then run: e2fsck -f -c -v /dev/sda1 substituting /dev/sda1 with your device with the error.
So do you mean that the drive indeed had bad sectors, but managed to "repair" them? –landroni Feb 6 '14 at 6:37 1 There's two types of bad sectors -- When I go into Disk Utility, I can see the drive but I'm not really sure what I'm looking at. Topics: Active | Unanswered Index »Laptop Issues »Is this a hardware issue? Make all the statements true Conference presenting: stick to paper material?
A good imaging procedure depends on such things as the nature of the drive problem, and the characteristics of the vendor-specific drive firmware. Related 4manufacturer's tool found bad blocks, but smartctl doesn't show any0Issue with bad sectors on a laptop hard drive1smartctl retest bad sectors7Does a bad sector indicate a failing disk?2Slow hard drive?2Hard I want to boot a small Linux Forum SolvedThe parameter is incorrect. Record of the report on a current hard drive condition.
dozerismydogsname wrote:Also mhdd couldn't fix the problem as it could barely read my hard disk.