Home > Group Policy > Event Id 1058 Group Policy Server 2012

Event Id 1058 Group Policy Server 2012


Concise & Thorough! x 111 Anonymous I had the same errors (1058 and 1030 every five minutes) and the ipconfig /registerdns command worked for me. the below is the ipconfig resutl C:\Documents and Settings\opaadmin.OSMPA>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : OPASR-02 Event ID 1030 Source Userenv; http://eventid.net/display.asp?eventid=1030&eventno=1542&source=Userenv&phase=1 Event ID 1058 Source Userenv http://eventid.net/display.asp?eventid=1058&eventno=1752&source=Userenv&phase=1 Cheers! http://fileupster.com/group-policy/event-1058-group-policy-failed.html

This method works, because by using the hosts file, the local DNS cache is loading the entries with a non-expiry TTL. During domain-upgrade from Windows Server 2000 to 2003, the proper ACLs are not granted on the existing GPOs. Edit the hosts file on each domain controller. The quickest way to check for problems from a system on which you’re getting 1058 and 1030 event errors is to run Gpotool against the DC that the computer is currently

Event Id 1058 Group Policy Server 2012

You can use Gpotool to check the consistency of GPOs across DCs within your environment. The ipconfig /all has numerous info that can help us. It contained only one NS record for a DNS server that no longer existed.

I recreated it and the errors went away after a gpupdate /force. This error message occurred on the only domain controller in the domain. Miles Monday, June 07, 2010 7:20 AM Reply | Quote Moderator 0 Sign in to vote On Mon, 7 Jun 2010 07:20:35 +0000, Miles Zhang wrote: > > >Hi, Event Id 1058 Error Code 65 This IP adress is neither a part of your DC configuration nor a part of your subnet.

In both cases, the error is usually the result of File Replication Service (FRS) problems with the Sysvol portion of a GPO on the domain controller (DC) that’s currently being used Event Id 1058 Group Policy Windows 7 Database administrator? x 1 Joerg Hermanns I had this problem when I accidentally modified the permissions on the SYSVOL share, so that the client computers were not able to read the group policies https://support.microsoft.com/en-us/kb/888943 Microsoft network server: Digitally sign communications (always) Disabled Microsoft network server: Digitally sign communications (if client agrees) Disabled To see these settings on a workstation go to Start -> Settings

x 2 EventID.Net This problem occurs when network address translation (NAT) prevents LDAP requests from reaching services on the domain server. Microsoft Windows Grouppolicy 1058 Then by choosing properties on the correct GPO I checked what the trivial name ("DisplayName") was and remade that particular GPO in GPMC with pointers using dfs-paths instead. The external preferred DNS entry was set to the internal LAN IP. At the command prompt, type "dfsutil /PurgeMupCache" (without the quotation marks), and then press ENTER.

Event Id 1058 Group Policy Windows 7

If only everyone who participated in Experts-Exchange would put so much effort into their answers!! I did the usual stuff.  I asked Dr. Event Id 1058 Group Policy Server 2012 On the domain controller: Ensure the the user and computer have appropriate permission to read the path specified in the event. The Processing Of Group Policy Failed 1030 the below are the event ID which are appears both in DC and File server.

He graduated with honors in Network and Communications. his comment is here x 1 Nico Baumgartner I have had Userenv events 1030 and 1058 after uninstalling the network card team support on an HP Server. I appreciate the critique, whether good or bad. B) If these errors show up every 15 minutes, it is usually a server to client problem. Windows Cannot Access The File Gpt.ini For Gpo

x 4 Ricky Rusland This error can also occur with McAfee Virus Scan Enterprise 8.0i (VSE). Posted by: Ricardo | 08/04/2012 at 09:55 PM Hi Daryl, my JUNCTION path was pointing to "domain.local". 1/ Would I still need to make that change since WINNT wasn't part of Since then, I've not had any problems". this contact form Group Policy is working correctly if the last Group Policy event to appear in the System event log has one of the following event IDs: 1500 1501 1502 1503 Related Management

I ensured that there are no errors in the event log and then went back and set the GPOs to the same settings they were before. Windows Cannot Query For The List Of Group Policy Objects Server 2003 Even with 5 minutes per server (to check the logs and other parameters), it may take an hour to make sure that everything is ok and no "red lights" are blinking This posting is provided AS-IS with no warranties or guarantees and confers no rights.

When it came back up, the 1030 and 1058 errors were occurring every 5 minutes.

In our case, there were no other permissions other than those, so these two subfolders would have been left with no permissions at all. In the network adapter settings I had to activate the "Client for Microsoft Networks". x 1 Tony Woods In our case, we were simply rebooting one of our DCs. Windows Cannot Access The File Gpt.ini For Gpo 1058 microsoft.com/?kbid=202840) can also apply in certain scenarios where your network switch is not initializing a system’s Ethernet port by the time Windows has started up.

from the command line. Ace, below are the IPconfig results of both DC and W/S Domain Controler Microsoft Windows [Version 5.2.3790] (C) Copyright 1985-2003 Microsoft Corp. Event Details Product: Windows Operating System ID: 1058 Source: Microsoft-Windows-GroupPolicy Version: 6.0 Symbolic Name: gpEvent_GPT_NOTACCESSIBLE Message: The processing of Group Policy failed. http://fileupster.com/group-policy/event-id-1128-group-policy-terminal-server.html Hello Sharifi, This appears to be a classic DNS issue.